Fruit Hammer Crusher
Suitable to crush seedless fruits/vegetables before pulping/juice extraction. Fitted with swing type hammer which ensures even granulating of crushed material.
|C 120||3 MT/hr||7.5 HP|
|C 123||5 MT/hr||10 HP|
|C 126||10 MT/hr||20 HP|
Hot Break System
The Hot Break System generates a thermal treatment that completely inactivates the pectic enzymatic activity. Suitable for pre-heating of tomato and guavas before juice extraction. The raw washed tomatoes or guavas are crushed in the mill and gets collected in the bottom tank. The Hot Break System is then circulated through the heat exchanger for preheating up to required temperature. Steam is the heating media used in the heat exchanger to heat the crush. After achieving the required temperature the product is discharged to a pulper for pulp extraction.
Advantages of Hot Break System:
- Deactivating the enzymes, which are likely to be generated.
- Getting good colour and maximum recovery.
- Better quality of the product.
- Available in capacities from 1 to 10 MT/hr.
This machine is used for skin removal, pulping and finishing of pulps from produce like mangoes, litchi, pineapple, tomato, carrot etc. The equipment incorporate scraper rotors, spiral scraper and brushes rotating at high speed which separate the stone, skin and pulp. The secondary stage refines the pulp received from the primary stage.
|P2-120||3 MT/hr||Twin||12.5 HP|
|P2-123||5 MT/hr||Twin||22.5 HP|
|P2-126||7.5-10 MT/hr||Twin||35 HP|
The machine is suitable for removing the stone/seed from fruits like mango, peach, apricot, cherry etc. by changing different perforation screens.
The fruits are opened up in the special crushing zone and the pulp is separated from the skin and stone.
Destoner is available in capacities from 1 to 10 MT/hr.
Suitable for cold break crushing/pulping of seedless fruit/vegetable like tomatoes to make concentrate juice and sauces.
Cold break extraction ensures lower temperature of enzyme passivation thus enhancing colour and quality of the pulp.
The first stage makes the first break then the refiner separates the skin and seeds from pulp.
The refiner is fitted with different perforation screens.
Production range: 1 to 10 MT/hr
Suitable for continuous separation of suspended solids from liquids or clarification of liquids. Modular construction, optimal adaptation to raw fruit/vegetable.
Available from 2 to 10 MT/hr.
SThis is a continuous juice extractor especially for fruits like apple, grape, pear, pineapple and carrot etc. The speciality of this machine is its high yield percentage of extracted juice. The machine is robust, multi-purpose and easy to maintain.
|Capacity||3 MT/hr||5 MT/hr||10 MT/hr|
|Belt Width in mm||1000||1200||1750|
|Size in mm||4000x1500x1900||4500x1800x2200||4600x2300x2350|
|Weight in kg||3600||4200||5800|